Fluidsys Training Centre is a leading institution for pneumatic training as well as hydraulic training. The practical-based pneumatic and hydraulic courses are designed and delivered in a systematic manner. Topics on the safety aspects of pneumatic and hydraulic systems, functions and symbols of system components, their typical control circuits, and maintenance & troubleshooting aspects are handled with the help of well-developed and up-to-date PowerPoint presentations, simulation software packages, and videos for quick learning. 

A long-term course on ‘Professional in Pneumatics & Hydraulics – Advanced Level with TUV Rheinland Certified Qualification’ is scheduled by the centre. The training centre conducts many short-term courses in the field of Pneumatics, Hydraulics, and PLC. You may prefer to join any of our scheduled short-term courses with nominal fees. The training centre is prepared to conduct tailor-made and onsite courses as per the requirements of the industry or institutions. 

If you are on the lookout for pneumatic training and/or hydraulic training, Fluidsys Training Centre is the best place that you can always depend on. 

For more details of Paperback & Kindle eBooks on Pneumatics and Hydraulics authored by Joji Parambath, the main faculty at Fluidsys, please visit:



Fluidsys offers the following long-term course for the advanced-level pneumatic training and hydraulic training. 


Professional in Pneumatics and Hydraulics – Advanced Level with TUV Rheinland Certified Qualification

[Coverage includes: Basic Pneumatics, Basic Hydraulics, Basic Electro-pneumatics & Electro-hydraulics, Advanced Pneumatics, Advanced Electro-pneumatics, Advanced Hydraulics, PLC, Design of fluid power systems, and Soft skills]

Course Duration: 6 Weeks

Course Fee: Rs. 24000 + 18% GST

Pay in 2 Installments:

1st Installment – Rs 12000 + GST on joining

2nd Installment – Rs. 12000 + GST at the beginning of the 4th week

Certification Fee: Rs. 3540

Course Dates for 2020-21:

28/09/20 to 06/11/20


Bachelor of Engineering/Technology or  Diploma in Mechanical, Electrical, Electronics, and Computer Science Engineering


Suitably qualified professionals, who want to upgrade their qualifications, with a minimum of 2 years of experience in Pneumatics and Hydraulics


TÜV Rheinland (India) Private Limited (Personnel Certification Body) verifies the fulfillment of the defined requirements. Upon successfully completing the course, TUV Rheinland certifies that the candidate has successfully achieved the qualification: ‘Professional in Pneumatics and Hydraulics – Advanced Level with TUV Rheinland Certified Qualification’.

For syllabus


Fluidsys imparts industry-relevant pneumatic training and hydraulic training. This course deals with the functions, types, construction, parameters,  and characteristics of components of industrial pneumatic and hydraulic systems. Typical circuits are simulated using a simulation software package and followed by practical. The following pneumatic courses and hydraulic courses are designed for the proper understanding of various aspects of pneumatic and hydraulic systems.

1. Industrial Hydraulics– Basic Level

[The coverage includes: Hydraulic safety, Hydraulic fundamentals, Hydraulic fluids, Filters, Power packs (Reservoir, Pumps, and PRVs), Actuators (Cylinders and Motors), Directional control valves, Symbols, Check valves, Flow control valves, Pressure control valves, Seals, Accumulators, Fluid conductors, and Maintenance & troubleshooting aspects.]

Duration: 6 Days

Tuition Fee: Rs. 10000 + 18% GST

Next Course: 07/09/20 to 12/09/20

2. Pneumatic controls – Basic Level

[The coverage includes: Generation and conditioning of compressed air, Actuators (Cylinders & rotary actuators), Directional control valves, Symbols as per ISO 1219, Flow control valves, Concepts of automation, Implementation of semi-automation and complete automation, Logic controls, Timers, counters, pressure sequence valve, conductors, and Maintenance, troubleshooting and safety aspects.]

Duration: 4 Days

Tuition Fee: Rs. 8000 + 18% GST

Next Course: 10/08/20 to 13/08/20

3. Electro-pneumatics and Automation – Basic Level

[This course deals with the functions, types, and symbols of the following components of electro-pneumatic systems: Single and double solenoid valves, Electro-magnetic relays, Momentary/Maintained contact PBs, Limit switches, Proximity sensors, Reed switches, Timers, Counters, Pressure switch. The following elctro-pneumatic control circuits are developed and simulated and implemented on trainer boards: Direct/Indirect controls, Logic controls, Latching circuits, memory circuits using double solenoid, Semi-automatic and fully-automatic controls, Circuits for timing and counting functions, and Circuits with pressure switch.]

Duration: 4 Days

Tuition Fee: Rs. 8000 + 18% GST

Next Course: 17/08/20 to 20/08/20

4. Design of Industrial Hydraulic Systems

[The course covers the sizing of hydraulic actuators, pumps, reservoirs, valves, accumulators, and fluid conductors. Simple hydraulic systems are designed with the help of Excel sheets]

Duration: 4 Days

Tuition Fee: Rs. 10000 + 18% GST

Next Course: 18/01/21 to 22/01/21

5. Design of Pneumatic Systems

[The course covers the sizing of compressors, pneumatic actuators, and valves. Simple pneumatic systems will be designed]

Duration: 4 Days

Tuition Fee: Rs. 8000 + 18% GST

Next Course: 16/11/20 to 19/11/20

6. Programmable Logic Controllers with Pneumatic (or Hydraulic) Applications

[The course covers the following topics: Hardware and software aspects of PLC, Ladder programs are developed for the control of single and multiple actuator pneumatic (or hydraulic) systems using programming elements like NO, NC, Coil, Timer, Set, Reset, and Counter. The implementation of the programs are carried out on our pneumatic or hydraulic trainer boards.]

Duration: 4 Days

Tuition Fee: Rs. 8000 + 18% GST

Next Course: 07/02/20 to 10/12/20

7. Human Machine Interface (HMI)

[Using OMRON NB Designer]

Duration: 3 Days

Tuition Fee: Rs. 8000 + 18% GST

Next Course: 11/12/20 to 13/12/20


We also handle pneumatic and hydraulic courses, including those listed below, upon demand. You may contact the training Centre for fixing the course content and reserving the time slot. 

  1. Electro-pneumatics – Advanced Level (3 Days) Rs. 8000
  2. Maintenance and Safety of Pneumatic & Hydraulic Systems (2 Days) Rs. 6000
  3. Fluidsim-P / Fluidsim-H (2 Days)

Contact Us for Your Pneumatic and Hydraulic Training Requirements

  • GSTIN: 29AADCF0201A1ZJ
  • The schedule of long-term and short-term courses for 2019-20 can be obtained from the page CALENDAR of our website.
  • You may apply for the pneumatic and hydraulic courses by visiting our CONTACT page and submitting relevant information. 
  • There are only limited seats for all the courses. Admission on first-come-first-served basis.

or Call us at 7338385505 or email us at info@fluidsys.org


Training courses are scheduled with flexible timing options:

Day-time Courses: 9.30 am to 4.30 pm

Evening Courses: 6 pm to 9 pm

Weekend Courses: 9.30 am to 4.30 pm

Hydraulic systems driven by servo valves provide highly accurate control over enormous forces. It consists of a transducer, a servo amplifier, a servo valve with a torque motor and an actuator with a connected load. It is a closed-loop system used for the precise control of the output (load) parameter, such as position, velocity, or force, in response to a command signal. The output is converted into an equivalent electrical signal by the transducer. This feedback signal is compared to a command signal (representing the required output) to generate an error signal.

12 thoughts on “Home

Add yours

  1. Hello sir I am interested in hydraulic and pneumatics training cource sir can I know what qualifications I should have.


  2. Myself Girish Hegde from Mangaluru.
    Interested in electro pneumatics advanced course-on demand.
    When can I attend ?
    Thank you


  3. Hello sir I am interested in hydraulic and pneumatics training cource sir can I know what qualifications I should have.

    I completed my B-com graduation in commerce field


  4. Good evening
    I am. Interested to do advanced pneumatic and hydraulic certification course. I would like to know do you have online course. When will be the next advance course starts.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


Up ↑

%d bloggers like this: